- The booth audio power must be on for all of the video distribution systems to turn on. The remaining audio power (amplifiers, etc.) are not needed unless using the audio system.
- If the projection computer is needed, locate the power button for the computer and press the button to turn the computer on.
The projectors are numbered 1-3 in order left to right.
- Locate the wired projector remote on the desk. Press the number for the desired projector and the press the power button to turn on the projector. Repeat the [projector number] - [power] sequence to turn on additional projectors as needed.
- If the confidence monitor is to be used, locate the appropriate remote control in the left booth drawer, walk out, and turn that TV on.
- If using the projection computer, shut it down using the normal operating system methods.
- If the confidence monitor was turned on, use the remote control to turn it back off.
- Using the wired remote, press the number for the projector and the standby button once, then again to confirm. Repeat the [projector number] - [standby] - [standby] sequence to turn off all additional projectors.
- If the full audio system was not turned on, turn off the booth audio power. Otherwise follow the booth audio power instructions to turn off the complete audio system.